Category: Wood Heat

Worked on the Trailer Today

It’s meant to rain tomorrow and Monday. It would interfere with work on the trailer, so we got up and got at it today. My main focus was to build on the backing and top of the shelf Missus is using to set the checkout on. I wanted ti to come out pretty good, so I gave it a bit of effort to give it a decent finish. Missus wanted the end that sticks out towards where a customer would come in to be rounded to reduce chances of injury, so I did that. It was a nice challenge for me as I was using a saw that makes straight cuts. (Resaw blade on the bandsaw; some rounding mut not much.) Then I gave it the correct finish with a handplane and finally 120 and 320 grit sandpapers. It came out right.

That’s bee most of my day today. Not the rounded pine board worktop, but the whole shelves to cabinet and then worktop thing. I did mow quite a bit of the grass this morning, and I cleaned up where the memorial garden used to be. It is set in a wagon made from a likely pre 1920’s truck frame converted to hay wagon which has since fallen to disrepair. The earth under the wagon had become hilly and impossible to mow, so I leveled that off with the tractor and made it so the grass there should recover fast, and the area be easy to manage.

Our weather forcast for today topped out at 81F, and over the next ten days it is not forcast to get higher than that. We are genuinely in get things done season! At least for a bit! Cooler outside, cooler inside! So if it rains, I can always go work on the den and get it ready for the cool season, and to do some candle-making and hopefully get started on some leather work, too. I would like to spend the winter doing those things where I have ready access to plenty of heat! The shop is hopeless, and will get too cold to work in for several months.

Finally, it is September now. The summer will end in just over two weeks. I gathered firewood yesterday and the day before. Well, some of it was for the saw. But I always have scraps to burn from that, as I cut off generous slabs to get right down to the lumber and make sure I have good pieces to add to the cordage. What’s more, I always grab a few rounds to top the trailer off and come home with something to split, too. Even when I am gathering primarily for the mill. With the weather cooler, now is the time to get all the last of the wood gathered and split, and some for next year too, if I have it in me to do it, and there is time. I have a yard to clean before the snow falls, and I have a lot of jobs to get done. I won’t list them, just say when I have done them.

Do I Need to Tell You?

It is hot! Summer weather gets a bit unbearable at this time of year. I think there are places where the temperatures have exceeded their normal range by a bit, and records have been set. Our highs have been a bit more in line with the norms of the past decade, though I have not looked in the records to compare. It seems like fairly normal hot weather. So why would I be moaning about it then? I suspect that it is because summers in say, southern Nevada, get hotter, but winters stay much warmer. If the lows barely break into the freezing range, compare that to our winter low of -21F this year. Our total range has been closer to 120 degrees F in total. I am not speaking for anywhere else, so much as just saying that the reason I am feeling overheated may be because of the severity of our temperature swings throughout the year.

This coming week we have a lot of work to get done! The weather will give us a break, and it should be much more bearable for a bit, so we will be taking advantage. We have really got to get a few last pushes through in order to get our home-based businesses started. We have things to organize, and we have some cleaning to do. IT is time to see about things like windows on the house, too. I have a bit of work to do around the old chimney to try to prevent a leak where it meets the roof. I hope to see a man come by to offer a price on getting our septic redone, so we can get the yard into a state we can live with. There are many projects to get done!

My personal push needs to be to get the shop in a working state, with all the workbenches cleared off, and the tools organized and put in places. I have the likely last of any major purchases on order now. It is a set of blades for my plough plane. I’d like to do more than just build, though some of the blades will help with that, but also be a bit decorative, which some of the other blades will accomplish.

About that firewood…

I have a happy setup established with the trailer, a winch, and the tools required to bring home logs just shy of ten feet long. Those are great for the mill, and produce some scraps for the firewood pile. I also need to get some proper splitting rounds to add to the firewood pile. It has taken longer than I hoped to get the collection tools gathered and working properly, and while I can work in the mornings when it is still cool, it heats up quick and puts a damper on getting the job done in a day from collection to putting everything where it belongs here ready to process. It is best for me if I can do that. Hopefully a little break in the temperatures will turn into a long break, and I can get down to get more wood soon. It is always one of the things that is hard to get my head around; going out in such heat to get firewood! One has to keep in mind just how cold it really gets here in the winter!

It is getting pretty close to time to eat! I am off to have a lovely Friday evening and enjoy the company of family before we spend our last weekend as people who are not in a hurry running our own businesses.

The Mud is Gone!

The mud has gone from all parts of the yard. Some patches had to be buried to vanish them, but after I did that with the tractor, I let things sit a couple of days and then gave it a go in the garden with the tiller. I was able to till without striking mud or sinking down too mauch anywhere. This morning I tilled the whole garden space again with the back flap on the tiller dropped all the way down, and it levelled the garden pretty good!

We had a gopher digging back in the orchard next to an apple tree. Yesterday I dug down and found the opening to his den and stuffed a pipe into that. Then I closed everything off again around the pipe and stuck the other end of it into the tractor exhaust pipe. I let that run till it was too hot to hold anymore, and then shut it off, pulled the pipe, and sealed the den. No more fresh tailings in front of the den this morning. I suppose that instead of eating the tree’s roots, the tree is going to be fertilized off the gopher.

I worked in the shop a bit today. The workbench by the south wall is finished for the time being. I only need to get a couple of fixtures and some bulbs to put some lights above it. I am happy with how it came out. I am happy that I got it pretty much the same height of the main workbench across from it, so i can span larger items from one to the other. I do need to get some electric power to it. I’ll be setting up my beeswax melters over there, and an oven to reseason my cast iron, too. That will get the stench of that chore out of the house, and make it easier if I find myself stripping old seasoning off the iron first.

I just have a lot of stuff that could use a home out of the workspace.

Missus is setting up to run an at home business with quite a few possible products. We have got a 60 inch loom set up now, and there are a lot of thigns she wants to make on that. We also have a potter’s wheel and a kiln set up, ready to start throwing. We both have lathes, and plenty of other tools for making all manner of things. I still need to get the sawmill set up. But that will come soon. It is getting time to get firewood going, and some wood to saw. It is also getting time to get the llamas shorn. We have busy days ahead of us!

The kids are finished up with their homeschooling. They will both be going to public school in the autumn. One is accepted to the school we wanted, and we are still waiting for a reply for the other.

This summer brings a whole change of pace for us here on the farm. It ought to be an advanture! With us both trying to earn here at home, nothing will be the same again.

The Forecast Improves!

This week we have snowfall coming till Thursday. After that, things stand to improve, and if the computer is to be believed, and is predicting it right, things will seriously improve!

As can be seen for the following week, we should see temperatures in the fifties! I think that with that, and a lack of precipitation, we could see the end of mud season!

The current temperature is kind of wintery, but for here, that is not true. This is early spring weather! Our records show what this place can really be like in the summers and winters, though those records are nowhere near normal cold temperatures. In fact, we are normally around 0F in the dead of winters. The recent years have brought us exceptional extremes. But whatever the case, at least for now, there is a tolerable improvement in the weather coming!

Our temperatures have been pretty insane over the last few years. Prior to July 2021, I would seldom see the mercury rise over the high 90’s. By seldom, I mean I don’t remember it ever having happened at all. I am pretty sure I saw the first time our area hit the 100’s since moving here a little over ten years ago. I cannot be so sure about those lows. But I can say that I have had this weather station installed since October 2018, and it has been keeping an eye on the weather every minute since. The only gaps have been where the computer failed, and I had some of the data saved in a separate database by the time I put a new computer in. There were no record setting extremes during that period that would have come down to what can be seen on our current records.

So, as the week progresses, I’ll be keeping an eye on the weather forecast, and hopefully we will see the prediction ring true, bringing us an end to mud season first and foremast, then an end to burning firewood, too!

And that’s the last thing I want to talk about here. Our house has only fair insulation and bad windows. Nonetheless, the forecasted weather for this week requires only a small fire burning in the stove. By Sunday we may not need to burn anything at all. So long as the sun shines in the day, and the house gets warmed by solar radiation in the days where the overnight low stays about 35F or above, we tend to not need to burn a fire. Given the wood remaining in the pile, I think we will be quite adequate for the year of the temps are taking a turn they intend to keep. Of course, there will likely be a drop here and there, but even those could keep us in snow and warm enough temps to be tolerable. Either way, it is certainly workshop weather!

It’s Amazing How Tired…

A fella can get from driving down to pick up a trailer, then another one. The trip was maybe 40 miles each way, but the driving and maybe the stress takes a toll on the old body. It is the arthritis playing me up, for sure.

But the point is, Missus has a new trailer to take to the Farmer’s markets, and I got one to put the tractor on.

A nice box trailer with a ramp on the back to make a mobile shop for Missus to use at the Farmer’s Market’s and out front of the house. This will allow her to set up a shop space without the month-to-month cost that I believe can kill a small business.

This flatbed trailer should help in many ways! It has stake pockets so I can build sides to keep long logs on it, and it has D-rings and ramps so I can load the tractor on it. I’d like to put a winch on it to load a dead car, truck, or tractor onto it.

Both trailers seem good, with solid jacks and decent LED lights. The electrical connectors are great compared to the other trailers I have, and the chains and spare tires are very nice. The rigs feel adequate for their purposes.

So, I suppose at this moment, I can hire out for tilling for spring gardens if anyone needs it. I should also be fine to do box blading, and post hole digging. I don’t really want to do junk haulage and have to pay out of my citizen’s account to unload at the dump for others. But I do want to get firewood and logs for milling on the trailer and bring them around to the house to work on.

So that’s where I think we’re at. We have more projects to handle now, since these trailers need a bit of customization to complete them. And right now, the mud is so bad, I cannot even take them to the back of the house or over to the designated trailer parking to get them off the front drive. It’s storms for the next few days, then we have warmer temps finally passing through! I’ll have plenty to do once the ground finally dries up!

Candle Making & Etc…

I have one of the crock pots full of wax and heating on the stovetop right now. The candle molds are waiting next to it. I have the wick out and ready to be cut then primed. My ten-year-old is doing her schoolwork, then she will be joining me to learn how to mold the candles for use. It is a part of her Homestead Economics class lesson. When these are done, we have the option of selling them, or using them ourselves. It is the using them ourselves that has me tempted to get some lovely bright candle lanterns from Townsends. Getting enough of them to be really useful would be expensive. But I would like them that much, and that is a thing.

& Etc…

I have not yet received any shipping confirmation on the sawmill. I still have not had any buyer’s remorse, either. I need to figure out where to put it, and I am working on ideas for that. If nothing else, I can put it on the other side of the street and have all the room I need to work all I want. I think if I had ordered an industrial mill, I would. But as a hobby mill, I think I would be more content with it on this side of the street, where I can use it with a bit more ease, and less of the officialness of leaving for work, as I would feel I would do if I were to cross the road.

A lot of my concern is the workflow of the mill. There will be logs to go in, lumber to come out, and off-cuts and sawdust to manage. I would prefer to use the tractor rather than a log deck to load the mill with. I want to stack the lumber straight into stickers, and onto bolsters. I think I have the flow worked out, and the position of things in relation to the mill itself. I guess I’ll have to go out with a measuring tape and confirm my ideas.

& More…

It snowed last night. WE got maybe 2 and 1/2 inches of it! Things were looking like they would clear up, and suddenly we are back under it again. Despite that, it was not a cold night. I burned wood, but not a lot of it. The temperature out right now is 36F. It feels fairly nice. That should tell all about the winter we had, when I was outside a bit ago in a short sleeve T-shirt and feeling quite nice.

According to the forecast, we are in a similar, though gradually cooling state till Monday. After that, the weather will come back up again to what it has been over the last week or so. It looks like we are on track for plenty of spring snow. I have no complaints about that. The more water that gets relocated to our area, the better things like hay prices ought to be. Really, everything else, too.

& A Little More

So, what’s the point of the mill? Part of it is living independently. It’s about being able to make whatever we need here on the farm rather than having to buy everything online. My arthritis is too bad to let me build a saw pit and saw lumber with a big old hand saw, but I can buy a mill, and saw trees down to boards and cants and posts, and whatever else I want. The wood species are a bit limited around here, but since I started splitting my own firewood, I have never run into having none of any kind. I have often had access to rather large logs and even whole trees. So why wouldn’t I want to take advantage of that? Furthermore, there are a few things that Missus wants that I am better off trying to build myself than looking for to buy. A single weaving loom of a certain size would cost as much as the mill did. A few smaller ones would certainly pay for it, too. So why not build it and make several and she can sell some? I also would be happy to operate as a neighborhood mill, making lumber for folks close by who need it. Small neighborhood operations are how the world once worked, and what we want it to come back to. We are trying to get to that.

End of February Update.

It is definitely still winter here at the farm. We have good chances of snow for most of the coming week. Looks from the weather radar that whatever does come will likely have to form, as nothing closer to the west coast seems to be heading our way. It was warm today, though! We got up to 38F according to our weather station.

The SDR Radio I got the other day worked as expected. I got it running that day and played around with it, then delivered the second one to the desktop computer upstairs but did not yet set that one up. It’s fascinating how it can read or see the whole spectrum, and portions of it visible at once to tell where different signals are and have a hint to what kind they are. FM Radio signals are amazing, especially where they have digital encoding on both sides of the frequency. Even stations without that digital encoding are amazingly powerful compared to the rest of the spectrum. I will have to work on reception and an improved arial.

The tractor reached 200 hours yesterday. That’s just shy of five months! I cannot believe we are coming up to five months of ownership already! It still seems new to me. Most of its work here has bene snow clearing, but as soon as the weather breaks to spring, I think it will see a total shift! I may move big snow piles into the orchard just to get the trees started for the year. I may have to move a lot of hay off the garden and start it for tilling. I want that space tilled four or more times prior to planting in May and June. There will be post holes to dig, too. I am going to have to reset some fencing and clear some old areas out. Then there is the firewood. I don’t expect to muck about with that this year, since I want to be two years stored by autumn, and since I want to have a load of wood to work with. I hope to see this whole area of my chores severely altered to what it has been in previous years.

I got the second GoPro camera that I have been thinking about. If I am going to do a YouTube channel, then this setup I have is good enough to do it with. I would benefit from a lavalier mic, but I have a separate sound recorder that can also do the trick for now. I’ll have to give it a try. I am having a card reader delivered so I can put one on my laptop and one on my desktop to unload videos and edit. I have tried out the GoPro cloud, and I am not terribly thrilled with any of it, apart from the discount they offer to users while shopping. I’d rather keep the filed local, I think. Then I’ll only upload final cuts to the Internet. I have yet to see any real advantage apart from having apparently all the space I need to keep every crap video file I make. That may turn out to be the seeds of a problem. But who knows? Maybe in the next few weeks I’ll get a video created and uploaded to the channel again.

Mondy is anticipated to be the day we have our deli slicer delivered. I have been wanting a proper one for many years now, and we have what appears to be a decent one on the way. It is a Berkel 300 Redline. I am a little worried about it after seeing the shipping details. For whatever reason, it is listed with a shipping weight of 122 pounds. I am having trouble believing that, but I worry that I believe wrong. I guess we’ll see what it is like when it gets here. But honesty, how can a home line slicer weight so much? Maybe they packed it in a wooden crate?

I have very few hand tools left in my wish list now. A shipment arrives also on Monday. It is just a few things, and while there are a couple more planes to be desired, I think I have enough to get a real start in my workshop. Spring will give us access to the barn for cleanup, and to rearrange our storage. I have a permanent wall to fix into the old garage door of my shop. That wall wants a window built into it for some heat and light. Missus has a kiln on order that also wants a home in the shop.

So, a lot is going on this year. I think we will be able to reach closer than ever to self-sufficiency. I have always said that it is a very expensive state to reach. On the upside, I am where I can start building some of the remaining tools I need. I am even considering building my own travishers. I’ll still have to buy the blades, but the handles and bodies will save me around $100 each. That’s not small potatoes. Small potatoes come from my garden.

There you have it! An end of February summary. That’s what’s going on, and where we are at, and where we are going for the moment. I am excited to be at the point in life where I feel like I finally have a life, and all the things that that entails. Having moved country twice and other events that have left me with next to nothing, it is a hard thing to recover from. But I feel quite like I have arrived. Everything else is just improving things up and building equity. For me, that’s a good place to be. Oh, and I am about two weeks short of my 52nd birthday.

Here Comes a Tough One

It sure was cold this morning. The temperature at 8:00AM was 15, but the wind chill had it at -2. The good news is, tomorrow morning will much colder. The forecast calls for a windchill of negative 30. We will see! But for today, preparations, preparations.

I got the firewood in, and we have extra in place within reach of the woodstove, in a barrel on the front porch. If it is too cold tonight, especially upstairs, the we may all sleep downstairs and keep the stove burning. There is space for everyone.

I had a look at the plane iron I was messing with the other day, and I have to say, I can see the dull bits on the blade. I do need to establish a good secondary bevel on it. I suspect that when I do, it will sure cut a lot better. But I was out in the shop in my heavy winter overalls and coat. It is no time to be messing about with things like that out there.

Things on the way for the shop at the moment: A bandsaw, two chair making books, several mats for keeping my back from hurting so much, a scorp, and an adze. In theory, I still may need a couple of spoke shaves, a V-gouge, and a travisher. I’ll also need some milk paint, and some cheap brushes, and a surface finish. At that point, I think I’ll have nearly everything I need to try my hand at making a Windsor Chair. I want to get started as soon as it is warm enough, and I can find some wood to do it with.

I have been watching some videos on YouTube on how to do it. There is a lot of work in one chair. But I think it could be better than fun, and reasonable to do. I also would very much like to make some for the house. After that, I think selling others would be just fine. The tools and the knowledge are on the way!

The evening is setting in. It is 20 minutes till 6:00PM. The temperature is currently 8 degrees, with the wind blowing at 13 miles an hour, gusting to 19. That leaves it feeling like -6F. The temperature is meant to drop all night long till it bottoms out around 7AM, Weather Underground says it should be about -10 by then, with the wind chill at -20. All we can do at this point is hope the best for the animals.

A Working Bench

I started the process of ordering a work bench for the shop at the end of December. Then I realized I had ordered the short one on accident, so I cancelled it and looked for the longer one. The shop I had originally ordered from did not have any, so I tried out another shop. That was the next day. I put the longer bench on order and have been waiting since. Today, it finally arrived.

The box was in perfect shape, so that restored my confidence after imagining that the bench was going to come in a manky box, looking utterly destroyed from its long journey. The driver came to the door and asked me where I wanted him to put the box, but I said if he would give me a minute, I could get a pallet fork on the tractor and get it out myself. He was quite excited! Especially as the yard did not look ready for him to run a pallet jack across it. Once I had it outside the door to the shop, I opened it and got the trestle put together with the help of my youngest daughter. Everything went together easily and well. Then came time to put the top on.

I lifted the end of the top, and considered if I could use the dolly to get it into the shop and do a partial lift at one end of the top to the kneel saw table, then up to the trestle with the other end, then slide it up. I lifted it again and sent a message for help. With two grown men lifting the top off the forks and into the shop and right onto the trestle, it took a lot out of us! I think the trestle must have weighed forty pounds, and the top weighed the rest of the 290 pounds the paperwork said it weighed.

The next tasks were to try it out for a couple of simple things, then get to cleaning the workshop! The place has been a mess, and I have not wanted to deal with it till I got this sorted out to get an idea of the final layout. The shop, being an old garage, I want to close off the car door and turn it into a wall with a window and a door in it, then build a rustic bench under the window to take working pieces of wood while I build on the bench opposite it. Going to plan, it will also be a great place to take some photos on the rustic top and under the window light. Well, that’s the plan, anyway.

Now, about the projects on the plan so far. I want to make a couple of blanket chests for the girls, and I have a few projects in the house that need finishing up. I also want to make a couple of weaving tools for missus, such as inkle looms and eventually, if I can get my head around it, some more complex looms, as well as maybe a drum carder. She has also asked for things like shuttles for the looms she already has. Then comes the furniture. I want to make reproduction pieces of things such as pie safe, and perhaps a Coolgardie safe. I would like to look at butcher block counter tops for the kitchen, handmade, of course, especially as a power plane for such big pieces is challenging. We could use a cabinet for the kitchen that would also work as a good-sized bread bin, since that seems to be a family favorite. Then there is the big goal. Since seeing Anne of All Trades on YouTube working on Windsor chairs, I have had a real hankering to build me a couple of those. I have always loved the styles, and the proper joinery to hold them together. I think that would be a real accomplishment to be proud of. Well, if it comes out half-way decent! Time to learn how to use milk paint! My interests lie in 18th and 19th century designs. With the Sjoberg’s Elite 2000 now sat in the shop, I have my “…official Red Ryder Carbine action, 200 shot, range model air rifle with a compass in the stock, and this thing that tells time.”

The next thing and perhaps final for the shop’s power tool collection should be a band saw. That’d be handy for resawing and preparing stock for the lathe. There are a few more planes and hand tools to get, too. I have the basic sharpening tools on the way to finally sort that out, and to keep the plane irons in top shape. Especially important now that I have a bench to do the work on, and I plan to keep the planes busy. I could use a mill for outside to reduce logs to lumber, seeing as I always seem to have access to logs thanks to the pursuit of firewood.

Am I excited for this? I think so. I am about to embark on a life’s ambition to really get into woodworking and to start building my own furniture, as I am so unhappy with what’s on offer down at the furniture store. I have held off because I was convinced to try hand planes by my Missus, and I did, and soon discovered that a proper plane is easier to use than the old ones I had used in the past, and that I really needed a bench that would hold the workpieces properly while I planed them. Believe you me, with this bench that excuse dies. On I go.

Wednesday Morning by the Fire.

It is snowing again this morning. Nothing like yesterday though. Just a little flurry. I see California is having rain again, so give that 24 hours and it will be here. It was warm overnight, and this morning I did not started a fire early this morning and am only getting around to it right now as I write this. It is coming up to 10AM. It’s not cold in here, but it is cool, and I figure one good blaze ought to take that chill off for a while. Plus, having a fire going in the stove is good for drying off those cast iron pans from breakfast, or softening the bacon grease enough to pour into the bin. I am doing both now. It’s much better to bring the grease up to a temperature warm enough to pour and put it all into the rubbish bin than to pour any of it into the sink, and down into the septic system.

I got a chance to get out to the shop for a few minutes this morning, and just a little cleaning put it into a place where I know what to do for my next steps that will make a big difference in cleaning it up ready for the new workbench. I will get to those steps this afternoon when I get a chance to get some things to the barn. When that is done, a few things need to get sorted off the foosball table before I am ready to be able to push it aside for the workbench to come through and set up. I am excited, but the tracking info still shows it has not moved yet. Do they ship stuff once a week, or does the shipper not actually have any tracking system? Who knows? When it gets here, it gets here.

The fire is not burning hot this morning. It really could be doing better. I just put a couple more logs on to see if that will help. I am thinking that closing up space in the stove will concentrate the heat better, and maybe those new logs will burn better. I think the wood got wet in the recent weather, even under the tarp, and not I am paying for that. I would really like to build some woodsheds out there to keep the wood in without messing about with the tarps that blow off in the wind. A good hard roof and sides would do a lot for keeping the wood ready to burn. Add that to the summer chores list. Add that to the current cost of doing anything! A fella wouldn’t complain about having a sawmill right now.

The extra logs helped the fire catch. I helped one of our daughters with her Social Studies. Missus has walked back and forth a few times with her computer in hand, and her headphones on while she works. I am back to a moment of peace now and can worry about that fire and some cleaning up around the house. Best way will be to put down the blog for the time being and get at it.