Category: Woodworking – Shop

Do I Need to Tell You?

It is hot! Summer weather gets a bit unbearable at this time of year. I think there are places where the temperatures have exceeded their normal range by a bit, and records have been set. Our highs have been a bit more in line with the norms of the past decade, though I have not looked in the records to compare. It seems like fairly normal hot weather. So why would I be moaning about it then? I suspect that it is because summers in say, southern Nevada, get hotter, but winters stay much warmer. If the lows barely break into the freezing range, compare that to our winter low of -21F this year. Our total range has been closer to 120 degrees F in total. I am not speaking for anywhere else, so much as just saying that the reason I am feeling overheated may be because of the severity of our temperature swings throughout the year.

This coming week we have a lot of work to get done! The weather will give us a break, and it should be much more bearable for a bit, so we will be taking advantage. We have really got to get a few last pushes through in order to get our home-based businesses started. We have things to organize, and we have some cleaning to do. IT is time to see about things like windows on the house, too. I have a bit of work to do around the old chimney to try to prevent a leak where it meets the roof. I hope to see a man come by to offer a price on getting our septic redone, so we can get the yard into a state we can live with. There are many projects to get done!

My personal push needs to be to get the shop in a working state, with all the workbenches cleared off, and the tools organized and put in places. I have the likely last of any major purchases on order now. It is a set of blades for my plough plane. I’d like to do more than just build, though some of the blades will help with that, but also be a bit decorative, which some of the other blades will accomplish.

About that firewood…

I have a happy setup established with the trailer, a winch, and the tools required to bring home logs just shy of ten feet long. Those are great for the mill, and produce some scraps for the firewood pile. I also need to get some proper splitting rounds to add to the firewood pile. It has taken longer than I hoped to get the collection tools gathered and working properly, and while I can work in the mornings when it is still cool, it heats up quick and puts a damper on getting the job done in a day from collection to putting everything where it belongs here ready to process. It is best for me if I can do that. Hopefully a little break in the temperatures will turn into a long break, and I can get down to get more wood soon. It is always one of the things that is hard to get my head around; going out in such heat to get firewood! One has to keep in mind just how cold it really gets here in the winter!

It is getting pretty close to time to eat! I am off to have a lovely Friday evening and enjoy the company of family before we spend our last weekend as people who are not in a hurry running our own businesses.

Candle Making & Etc…

I have one of the crock pots full of wax and heating on the stovetop right now. The candle molds are waiting next to it. I have the wick out and ready to be cut then primed. My ten-year-old is doing her schoolwork, then she will be joining me to learn how to mold the candles for use. It is a part of her Homestead Economics class lesson. When these are done, we have the option of selling them, or using them ourselves. It is the using them ourselves that has me tempted to get some lovely bright candle lanterns from Townsends. Getting enough of them to be really useful would be expensive. But I would like them that much, and that is a thing.

& Etc…

I have not yet received any shipping confirmation on the sawmill. I still have not had any buyer’s remorse, either. I need to figure out where to put it, and I am working on ideas for that. If nothing else, I can put it on the other side of the street and have all the room I need to work all I want. I think if I had ordered an industrial mill, I would. But as a hobby mill, I think I would be more content with it on this side of the street, where I can use it with a bit more ease, and less of the officialness of leaving for work, as I would feel I would do if I were to cross the road.

A lot of my concern is the workflow of the mill. There will be logs to go in, lumber to come out, and off-cuts and sawdust to manage. I would prefer to use the tractor rather than a log deck to load the mill with. I want to stack the lumber straight into stickers, and onto bolsters. I think I have the flow worked out, and the position of things in relation to the mill itself. I guess I’ll have to go out with a measuring tape and confirm my ideas.

& More…

It snowed last night. WE got maybe 2 and 1/2 inches of it! Things were looking like they would clear up, and suddenly we are back under it again. Despite that, it was not a cold night. I burned wood, but not a lot of it. The temperature out right now is 36F. It feels fairly nice. That should tell all about the winter we had, when I was outside a bit ago in a short sleeve T-shirt and feeling quite nice.

According to the forecast, we are in a similar, though gradually cooling state till Monday. After that, the weather will come back up again to what it has been over the last week or so. It looks like we are on track for plenty of spring snow. I have no complaints about that. The more water that gets relocated to our area, the better things like hay prices ought to be. Really, everything else, too.

& A Little More

So, what’s the point of the mill? Part of it is living independently. It’s about being able to make whatever we need here on the farm rather than having to buy everything online. My arthritis is too bad to let me build a saw pit and saw lumber with a big old hand saw, but I can buy a mill, and saw trees down to boards and cants and posts, and whatever else I want. The wood species are a bit limited around here, but since I started splitting my own firewood, I have never run into having none of any kind. I have often had access to rather large logs and even whole trees. So why wouldn’t I want to take advantage of that? Furthermore, there are a few things that Missus wants that I am better off trying to build myself than looking for to buy. A single weaving loom of a certain size would cost as much as the mill did. A few smaller ones would certainly pay for it, too. So why not build it and make several and she can sell some? I also would be happy to operate as a neighborhood mill, making lumber for folks close by who need it. Small neighborhood operations are how the world once worked, and what we want it to come back to. We are trying to get to that.

End of February Update.

It is definitely still winter here at the farm. We have good chances of snow for most of the coming week. Looks from the weather radar that whatever does come will likely have to form, as nothing closer to the west coast seems to be heading our way. It was warm today, though! We got up to 38F according to our weather station.

The SDR Radio I got the other day worked as expected. I got it running that day and played around with it, then delivered the second one to the desktop computer upstairs but did not yet set that one up. It’s fascinating how it can read or see the whole spectrum, and portions of it visible at once to tell where different signals are and have a hint to what kind they are. FM Radio signals are amazing, especially where they have digital encoding on both sides of the frequency. Even stations without that digital encoding are amazingly powerful compared to the rest of the spectrum. I will have to work on reception and an improved arial.

The tractor reached 200 hours yesterday. That’s just shy of five months! I cannot believe we are coming up to five months of ownership already! It still seems new to me. Most of its work here has bene snow clearing, but as soon as the weather breaks to spring, I think it will see a total shift! I may move big snow piles into the orchard just to get the trees started for the year. I may have to move a lot of hay off the garden and start it for tilling. I want that space tilled four or more times prior to planting in May and June. There will be post holes to dig, too. I am going to have to reset some fencing and clear some old areas out. Then there is the firewood. I don’t expect to muck about with that this year, since I want to be two years stored by autumn, and since I want to have a load of wood to work with. I hope to see this whole area of my chores severely altered to what it has been in previous years.

I got the second GoPro camera that I have been thinking about. If I am going to do a YouTube channel, then this setup I have is good enough to do it with. I would benefit from a lavalier mic, but I have a separate sound recorder that can also do the trick for now. I’ll have to give it a try. I am having a card reader delivered so I can put one on my laptop and one on my desktop to unload videos and edit. I have tried out the GoPro cloud, and I am not terribly thrilled with any of it, apart from the discount they offer to users while shopping. I’d rather keep the filed local, I think. Then I’ll only upload final cuts to the Internet. I have yet to see any real advantage apart from having apparently all the space I need to keep every crap video file I make. That may turn out to be the seeds of a problem. But who knows? Maybe in the next few weeks I’ll get a video created and uploaded to the channel again.

Mondy is anticipated to be the day we have our deli slicer delivered. I have been wanting a proper one for many years now, and we have what appears to be a decent one on the way. It is a Berkel 300 Redline. I am a little worried about it after seeing the shipping details. For whatever reason, it is listed with a shipping weight of 122 pounds. I am having trouble believing that, but I worry that I believe wrong. I guess we’ll see what it is like when it gets here. But honesty, how can a home line slicer weight so much? Maybe they packed it in a wooden crate?

I have very few hand tools left in my wish list now. A shipment arrives also on Monday. It is just a few things, and while there are a couple more planes to be desired, I think I have enough to get a real start in my workshop. Spring will give us access to the barn for cleanup, and to rearrange our storage. I have a permanent wall to fix into the old garage door of my shop. That wall wants a window built into it for some heat and light. Missus has a kiln on order that also wants a home in the shop.

So, a lot is going on this year. I think we will be able to reach closer than ever to self-sufficiency. I have always said that it is a very expensive state to reach. On the upside, I am where I can start building some of the remaining tools I need. I am even considering building my own travishers. I’ll still have to buy the blades, but the handles and bodies will save me around $100 each. That’s not small potatoes. Small potatoes come from my garden.

There you have it! An end of February summary. That’s what’s going on, and where we are at, and where we are going for the moment. I am excited to be at the point in life where I feel like I finally have a life, and all the things that that entails. Having moved country twice and other events that have left me with next to nothing, it is a hard thing to recover from. But I feel quite like I have arrived. Everything else is just improving things up and building equity. For me, that’s a good place to be. Oh, and I am about two weeks short of my 52nd birthday.

Scorp & Adze

I have searched high and low, the world over via the Internet to find two tools necessary to try out making a Windsor chair. They could be found few and far between, but the other day I was watching a video of Curtis Buchanan talking about chairmaking, and he mentioned a name I could not quite make out for where he had gotten his scorp, one of the two tools. Luckily, he had mentioned the location of the tool maker, too. So with a little help from the behind-the-scenes trolls over there at Google, I searched and found the maker’s website, and ordered both the scorp, and an adze. The adze is for quick, rough removal of material in a valley, such as a seat bottom. The scorp is for closer, more refined work. A travisher is required for finishing, and I have yet found where I would like to get one of those for sure, though I do have my eye on a site in England that sells them.

There are different types of adzes to be had. Some are short handled and useful for benchtop work. Generally, they are used to scoop wood out of a surface, and the user would hold the tool facing towards himself and swing like a hatchet. Others are long handled, and the user will stand on the work surface, and swing the adze towards his feet. I got the long handled one, figuring I could choke up on it and do benchtop work, or stand and do the ground level stuff. When Jon Townsend built his dugout canoe on his YouTube channel, he used a long handled one, so I don’t want that kind of opportunity to pass by for having the wrong tool. If necessary, I figure I can cut the handle.

The scorp is basically a curved drawknife. It is a blade around a foot long, with handles on each end. It is pulled downwards, again towards the user, and takes shavings of wood, rather than scoops like the adze. The cut is wider and shallower than the adze, and so is more refined. If the adze is scissors, the scorp is more to the effect of the electric hair trimmer. The travisher is more like a razor. Each had its finish, and the scorp will bring the work much closer to the final finish than could possibly be achieved with the adze.

Both tools were readily available on the website of Barr Specialty Tools. The maker is Barr Quarton. Nutty enough to me, he is out in McCall, Idaho! In the end, after all the searching, I ordered a tool from a guy in the same state as I live. Barr has trained on tool making, and with Japanese sword makers, so he talks about folding in carbon in his blades, giving them the edge on cutting. Buchanan recommended them as a superior tool. Since I was happy to take the word of a craftsman in the trade, and to shop locally, Barr Tools was my port of call for these tools. I Was surprised, as my searching had revealed few makers, especially in the US, and nothing of quality craftsmanship. Here, I got both, and with far fewer miles between me and the place of origin than any other.

Woodcraft has not confirmed shipping yet on the bandsaw I ordered, but the money has been taken from the appropriate account. I’ve paid them. My shop is small, and I do not see needing more than the Laguna 14bx. I have really enjoyed my Laguna lathe, so far, and decided to go with them, though I sometimes have doubts and think I might have liked a Harvey a bit better. But then, the only reason I can really find to regret is the blade guides, and those can be replaced if the ceramic guided of the Laguna turn out to be that bad. Carter makes some bearing guides for it. While I will be quite happy for the saw to arrive, it has been so cold in the shop that I would not be able to use it now anyway. So, it gets here when it gets here. As long as it is by spring, or whenever the weather becomes suitable to try it out. I have some blades for it arriving on Saturday, giving me a bit of flexibility with the tool. The bandsaw will provide curved cuts, resawing, and lathe stock prep. In fact, I am eyeing a spot for it right across from the lathe.

After these tools, I think a travisher is in order to complete the requirements, though I may still find a convex spokeshave necessary to complete the spindles. But with the, the shop is more or less complete to the requirements of chairmaking, and many other tasks.

The shop does not open just yet, however! It is coming up to 4:30 in the morning, and it is currently -4F outside. It does not bode well for a nice 70F degree day, suitable to a lovely time working. Looks more like another day hiding in the house! Well, everything has a season, as Jill Winger pointed out in her global email yesterday.

Here Comes a Tough One

It sure was cold this morning. The temperature at 8:00AM was 15, but the wind chill had it at -2. The good news is, tomorrow morning will much colder. The forecast calls for a windchill of negative 30. We will see! But for today, preparations, preparations.

I got the firewood in, and we have extra in place within reach of the woodstove, in a barrel on the front porch. If it is too cold tonight, especially upstairs, the we may all sleep downstairs and keep the stove burning. There is space for everyone.

I had a look at the plane iron I was messing with the other day, and I have to say, I can see the dull bits on the blade. I do need to establish a good secondary bevel on it. I suspect that when I do, it will sure cut a lot better. But I was out in the shop in my heavy winter overalls and coat. It is no time to be messing about with things like that out there.

Things on the way for the shop at the moment: A bandsaw, two chair making books, several mats for keeping my back from hurting so much, a scorp, and an adze. In theory, I still may need a couple of spoke shaves, a V-gouge, and a travisher. I’ll also need some milk paint, and some cheap brushes, and a surface finish. At that point, I think I’ll have nearly everything I need to try my hand at making a Windsor Chair. I want to get started as soon as it is warm enough, and I can find some wood to do it with.

I have been watching some videos on YouTube on how to do it. There is a lot of work in one chair. But I think it could be better than fun, and reasonable to do. I also would very much like to make some for the house. After that, I think selling others would be just fine. The tools and the knowledge are on the way!

The evening is setting in. It is 20 minutes till 6:00PM. The temperature is currently 8 degrees, with the wind blowing at 13 miles an hour, gusting to 19. That leaves it feeling like -6F. The temperature is meant to drop all night long till it bottoms out around 7AM, Weather Underground says it should be about -10 by then, with the wind chill at -20. All we can do at this point is hope the best for the animals.

Two Points for Today

Two items of note for today.

The first is that we are at the end of the firewood in the first half of the bunk. After I go out tonight and get more wood to bring in, I will be bringing it from the second half of the bunk. We started burning on 22nd of October 2022. That was three months, five days ago. If we can make the second half of the bunk las as long, which it may not though, due to it being one row of wood fewer than the first half had, we should run out about 2 May. That is only accounting for what is in the bunk. There is also wood in the scrap heap, and wood that is on the side next to the pen we currently have two goats in.

The other item of note is that I put a bandsaw on order tonight. I ordered it through Woodcraft, which was slow when I ordered the lathe through them. Incidentally, I ordered the 220-volt version, which is two and a half horsepower. I hope to be able to do some small-scale milling with it. It will be able to prepare blanks for the lathe, and that alone is a good enough reason to get it. But the other things, such as milling, resawing, and some scroll sawing are all just gravy. I think this is a good choice.

I have some cosmetic work do to on the shop. Maybe that will be an early project the band saw can help me out with. Maybe I dream too much!

It snowed this morning, and I got some time out to clear the front and the dog run with the tractor.

Those are all the points I wanted to cover for today.

A Working Bench

I started the process of ordering a work bench for the shop at the end of December. Then I realized I had ordered the short one on accident, so I cancelled it and looked for the longer one. The shop I had originally ordered from did not have any, so I tried out another shop. That was the next day. I put the longer bench on order and have been waiting since. Today, it finally arrived.

The box was in perfect shape, so that restored my confidence after imagining that the bench was going to come in a manky box, looking utterly destroyed from its long journey. The driver came to the door and asked me where I wanted him to put the box, but I said if he would give me a minute, I could get a pallet fork on the tractor and get it out myself. He was quite excited! Especially as the yard did not look ready for him to run a pallet jack across it. Once I had it outside the door to the shop, I opened it and got the trestle put together with the help of my youngest daughter. Everything went together easily and well. Then came time to put the top on.

I lifted the end of the top, and considered if I could use the dolly to get it into the shop and do a partial lift at one end of the top to the kneel saw table, then up to the trestle with the other end, then slide it up. I lifted it again and sent a message for help. With two grown men lifting the top off the forks and into the shop and right onto the trestle, it took a lot out of us! I think the trestle must have weighed forty pounds, and the top weighed the rest of the 290 pounds the paperwork said it weighed.

The next tasks were to try it out for a couple of simple things, then get to cleaning the workshop! The place has been a mess, and I have not wanted to deal with it till I got this sorted out to get an idea of the final layout. The shop, being an old garage, I want to close off the car door and turn it into a wall with a window and a door in it, then build a rustic bench under the window to take working pieces of wood while I build on the bench opposite it. Going to plan, it will also be a great place to take some photos on the rustic top and under the window light. Well, that’s the plan, anyway.

Now, about the projects on the plan so far. I want to make a couple of blanket chests for the girls, and I have a few projects in the house that need finishing up. I also want to make a couple of weaving tools for missus, such as inkle looms and eventually, if I can get my head around it, some more complex looms, as well as maybe a drum carder. She has also asked for things like shuttles for the looms she already has. Then comes the furniture. I want to make reproduction pieces of things such as pie safe, and perhaps a Coolgardie safe. I would like to look at butcher block counter tops for the kitchen, handmade, of course, especially as a power plane for such big pieces is challenging. We could use a cabinet for the kitchen that would also work as a good-sized bread bin, since that seems to be a family favorite. Then there is the big goal. Since seeing Anne of All Trades on YouTube working on Windsor chairs, I have had a real hankering to build me a couple of those. I have always loved the styles, and the proper joinery to hold them together. I think that would be a real accomplishment to be proud of. Well, if it comes out half-way decent! Time to learn how to use milk paint! My interests lie in 18th and 19th century designs. With the Sjoberg’s Elite 2000 now sat in the shop, I have my “…official Red Ryder Carbine action, 200 shot, range model air rifle with a compass in the stock, and this thing that tells time.”

The next thing and perhaps final for the shop’s power tool collection should be a band saw. That’d be handy for resawing and preparing stock for the lathe. There are a few more planes and hand tools to get, too. I have the basic sharpening tools on the way to finally sort that out, and to keep the plane irons in top shape. Especially important now that I have a bench to do the work on, and I plan to keep the planes busy. I could use a mill for outside to reduce logs to lumber, seeing as I always seem to have access to logs thanks to the pursuit of firewood.

Am I excited for this? I think so. I am about to embark on a life’s ambition to really get into woodworking and to start building my own furniture, as I am so unhappy with what’s on offer down at the furniture store. I have held off because I was convinced to try hand planes by my Missus, and I did, and soon discovered that a proper plane is easier to use than the old ones I had used in the past, and that I really needed a bench that would hold the workpieces properly while I planed them. Believe you me, with this bench that excuse dies. On I go.

Snow Handling with a Tractor

It’s two degrees above freezing outside right now, gone after 5:30 PM. This winter has been pretty warm. The snow on the ground seems wet, and we keep getting puddles then ice skating rinks all around. I plow the dog walking path, and the top has a new finish on it by morning when the flat snow has melted during the day, then iced over during the night. It’s not the safest environment to walk in. Then again, we have had worse. But as winter seasons go, this is not a cold one, for sure.

So far this year we keep getting little bits of snow. We put in the footprints, then within a few days they are gone. It snowed maybe an inch and a half last night! It was just enough to want to clear it, but not enough to change the world or end the drought. But who knows what the cumulative effect of all this snow will be? We just need it to keep coming!

I am not entirely sure that the tractor would handle a single heavy snowfall. If I had a proper snow pusher or plow blade, then yeah, I think it would do amazing things. But with a loader bucket and a box blade, it has limits to what it can move in each pass.

All the snow clearing burns fuel. The cost of fuel is not very low this year, as you know. And as it keeps falling in these little bits at a time, I get to burn plenty of fuel to keep the place clear.

Between all this, I am trying to establish a snow strategy. Where are the best places to pile it up? How much should hit the ground before I clear it up? What areas should I clear off, and what should I leave? It’s great to have a cab and be able to work any time of day or night and stay warm.

One of the things that has really paid off with the tractor though is the ability to walk around outside without being forced into little foot-made paths that weave around almost randomly. I have full walkways and plenty of room to drive vehicles around without getting stuck.

Feeding has been so much easier this year! I put a bale in the bucket and take it around to where the llamas and horse is and deliver a couple of flakes per animal. By the time I am done with the paddocks with one or two animals in each, I have a final one with three that I can just dump the rest of the hay into. It is dead easy. It means I only end up out of the tractor three times after I have loaded the hay into the bucket. And those three times are very short, and don’t really require a coat. Makes a lovely winter chore list! There are other times I am out of the tractor for longer, but for feeding the goats, and for loading firewood into the bucket to take to the house. The bucket can carry a full load for a 24-hour burn. That never takes too long, so I have hardly been cold this winter compared to previous years!

There is a lot to get doing soon. When my workbench shows up in the next week or two, and I get it set up, I expect it to increase my opportunities to work in the shop. All I need to depend on is being able to warm it in there and being able to find some wood to work with! I can sure imagine a few things to build on it! I can also image being able to clear up and do some more candles.

That’s what is on my mind right now. All that and a bag of popcorn. I think I’ll go get that popping!

A Storm Blows Through the Farm

I woke up this morning around 2:45 and noticed the ghostly sound of children screaming. Turned out it was just the wind. I was out doing chores last night and noticed the tarp had blown off the hay pile. Well, that will never do. That is one of those fixes that has got to be handled immediately when the forecast suggests rain. I put the tarp back on and fastened it down as best I could with all the bungee cords I could find. The big tarp is not in great shape, and the grommets are not all in place. So, fastening it down was not straightforward. After waking up this morning, I found myself lay in bed listening to the wind and theorizing on the best way to fasten a tarp so that the wind does not catch it and flap it to pieces. The conclusion I came to was ropes pulled taught, not tight, and one on every grommet to prevent any flapping. No metal to prevent any tearing of the tarp too. But it’s too late for the tarp we have at the moment.

I finally got up and dressed, then went out to give it a look when I realized I had nothing else to do but worry about the hay. Our whole winter’s supply is in one stack, and if it gets wet, rots, then generates heat and catches on fire, then we lose everything all at one. That is not acceptable at all. I need to do something about that.

When I went out, I took the tractor along, and it provided lots of light and the loader provided a step to help me up onto the pile of hay to try to get a handle on the bit that I found flapping lose. That is very destructive to a tarp! It also left the two new big bales exposed. The grommets were gone along that edge, so I did what I could do, which was to grab the trailer for the lawn mower and put it on top of the tarp on the hay pile. Naturally, the lovely loader on the tractor did all the lifting! I should go out and buy a new tarp in the morning and put it on before the weather takes a turn for the worse. Saying that, it was nearly 60F out when I was out messing about with the tarp!

In other news on the farm, the electrician came to do the job of installing panels in our two outbuildings yesterday. I am at ease with the work that needs to be done from the panel to each light and outlet. But putting in a proper installation from the service to the panes was not something I was comfortable with. We put in an underground cable, and it required a splice to come to the two buildings, and that was also something I worried about. But having seen it now, I think I could do the same work to some sort of smaller scale if needed in the future. But I foresee only a single breaker from the cottage out to the chicken coop in my future. They could use light and some heat for their water. I also would love to see some lights on the exterior of the barn to help illuminate against the wild animals that come visiting.

In addition to electrifying the cottage, I also will be able to give the shop a proper installation of electrical outlets and lighting. I have been working off of an extension cord thus far, which is ridiculous and unsafe. It also meant leaving a gap in a window on the front porch for the cord to lead out of. I’ll be able to close that up and see how warm we can actually get it out there in the near future. Furthermore, I will be able to install things like my welder in the shop and run enough power to install dust collection and proper power tools and such. I would also like to arrange easy access for a fridge to sell eggs from the front of the shop, near the road. I would also like very much to get a bandsaw in the shop that will allow me to make some flat stock, do some resawing, and make some blanks for the lathe. This is all very exciting stuff! Let’s hope Home Depot has got the breakers I need in stock when I go later in the day!

Progress is always a wonderful thing!

Late Summer Projects Update

I have finished most of the fencing for the old llama pens in the side yard next to the house. These pens are conveniently located and make life easy daily, but especially in winter, for feeding and caring for the animals. I have two goats in the pen I am looking at keeping the calves in for their winter feedings, and I have let the calves out into the pen, too. The gates are in where I want them, finally allowing access to those pens for things like the lawn mower, and hopefully one day a tractor large enough to lift out anything that dies in the pens. It happens. Best to make it manageable. The only bit of fencing left to do there is along the east side of one of the pens where there is electric fencing at the moment.

The new driveway is serviceable to some degree now! It is rough and could really use a smoothing out. I have been hoping for years to get a tractor to do this sort of thing, but one never comes. The resources to do so may come soon, finally. If so, I would like to level it out and push a little out to grade and give it a smooth transition out to the road, rather than through the shallow end of the borrow pit, as is there now.

I have all the hay stacked in one place now, rather than sitting in a trailer. I need a lot more hay for over winter. I’ll have to have help loading it all, as there is too much for me to do on my own. I have about 75 bales now and need a total of around 300. So that’s an ongoing project. I also want to get a feeder to help keep the hay off the ground in the pen, though I have seen one farmer who successfully feeds on the ground in a field all winter. It is an opportunity to get one, and I probably should, though. It will serve more than just these cows.

Firewood had had a moment of pause as I have worked on the fencing and focused a little on getting hay. I have a decent pile in the Service Yard that I brought home in spring. It needs to be cut to length and split and stacked before I will really know how far I am from having enough for this winter. I do need a bit more, I am sure. With the summer being quite as hot as it has been, and the heat knocking out a good portion of working hours, I don’t think I am ready yet, at all, though I am close, and I would really love to be ahead or next year.

As I write this, we had one day of reasonable temperatures. There are more autumnal temps coming, too. Now is the time to act! It is time to boot the projects that need to be worked around the weather forward. Those include hay gathering, wood gathering, and things like getting up in the attic and running an electrical wire that needs putting in for the outlet I installed in an awkward corner of my den. The high temps are forecast now for two mid 80’s and the rest to explore the whole of the 70’s for the next ten days. There is also rain in the forecast, which would be a very welcomed relief from the dry summer we have had. Although, when I checked my weather records on our station, it was surprising to find this year was actually not the driest recorded. Quite the opposite! The summer months have recorded quite a lot more rain than in previous years. August pulled in 3.44 inches, while previous years have hovered closer to less than one inch, for example.

There are other projects to tackle in the cooler weather, as well. I can get back to the shop, where I can work on the lathe, and candle making. It needs a little clean up in there. I’d also like a proper workbench for wood working. In addition to all this, there is the apparently annual cleaning of the barn that is required before the snowy season starts. The granary has some things stored in it that should not be there. I want my cast iron out! The woodstove will need a servicing before the burning season begins, as well as the chimney cleaning out. I also have some firewood that wants splitting to use in the woodshop. There will be a period when the autumn is too cold, and the shop will be too, and it will want a little heat to keep it, till the winter sets in properly, and makes it all too cold to do anything in for more than a few minutes. That will be the time when I will have to transition any light work into my den, and I can make candles and do leather working in there. All of that must be arranged for.

So that’s where things are as of September 10th, 2022. Let’s see how much we can get done before the end of the month!